Re: 350 Utility Hydraulics won't stay up

Posted by Bob M on April 18, 2006 at 07:00:10 from (151.190.254.108):

In Reply to: 350 Utility Hydraulics won't stay up posted by Mark S. Florida on April 18, 2006 at 06:33:40:

Mark - Most likely problem is a bad (internally leaking) implement lift cylinder. However it could also be leaky remote control valve at the tractor.

If your cylinder hoses have quick disconnect couplers, lift the implement with the cylinder then disconnect the hoses at the couplers. (Good idea to temporarily jack the implement to take the load off the cylinder while you disconnect the hoses. Then remove the jack.)

If the implement still leaks down with the hoses disconnected, it's time for a cylinder rebuild. Otherwise the problem is the hyd valve on the tractor.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]