Re: 350 Utility Hydraulics won't stay up

Posted by Janicholson on April 18, 2006 at 07:19:19 from (199.17.6.175):

In Reply to: 350 Utility Hydraulics won't stay up posted by Mark S. Florida on April 18, 2006 at 06:33:40:

In addition to the good advice below, I would add the idea that your 2PT FH cylinder (or three PT adapter on the 2PT FH) might be the cause. Block up the hitch and release all pressure by working the valve handles with the engine off. Remove the hoses from the cylinder, and plug the ports. with engine off, remove blocking (be safe) and see if the cylinder leaks down. If it does, it is in need of new piston seals. Not a bad thing, just normal for a hydraulic shop, or you if handy.
If it does not leak down, the valvs controlling the cylinder need service (probably reploaced). Good luck, let us know!
JimN

Replies:

• Re: 350 Utility Hydraulics won't stay up Evan350 08:19:59 04/18/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]