Re: h smokes

Posted by Janicholson on April 22, 2006 at 18:29:21 from (66.173.50.129):

In Reply to: h smokes posted by donald schnupper on April 22, 2006 at 16:55:50:

Yes, If the guides are less than .002 measured lateral movement on the stem, I would put Perfect circle seals on it (with air pressure to the cylinder when it is at TDC, and held there so the valves cannot drop into the cylinder) the spring can be removed and seals installed without head removal.

A spell of ideling, (or down hill in high with the throttle closed) will pull in oil. Then when the throttle is opened, it will smoke like a green wood fire. If it smokes under load for as long as it is loaded I would re ring it, (or a piston/sleeve kit)
JimN

Replies:

• Re: h smokes donald schnupper 19:28:28 04/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]