Re: Clutch adjustment H

Posted by Johann on April 23, 2006 at 14:02:10 from (65.114.81.83):

In Reply to: Re: Clutch adjustment H posted by Michael Soldan on April 23, 2006 at 10:22:03:

Mike, We used 3 of the bolts that attach the cover plate
to the flywheel to compress everything so putting the
flywheel and coverplate assembly together would be
easier. We then attatched the plate to the flywheel,
removed the three compressing bolts and put them in
place on the outer edge of the coverplate /flywheel.
There is a bolt with a nut on each of the clutch fingers.
Is this where the finger adjustment is made? If so, which
way do you turn it and can I mess anything up that I
haven't alr4eady done. More advice please. Thanks.

Replies:

• Re: Clutch adjustment H Michael Soldan 14:41:14 04/23/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]