Re: Solid State Ignition

Posted by genep on April 27, 2006 at 10:10:33 from (166.102.51.83):

In Reply to: Re: Solid State Ignition posted by Allan In NE on April 27, 2006 at 07:00:53:

The purpose of the correct resistance of the coil is to eliminate the need for a ballast resistor.

they send a plastic strip to use as a feeler guage to set the gap on the trigger. It seems to be about .030-.040". I don't think they are real sensitive in the gap. Of course if there are other problems in the distributor I don't know if they will correct it.

I'd suggest that you Google for Pertronix and call their tech line. I've found them very helpful. You probably should have your distributor manufacturer and model number handy when you call.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]