Re: Super C head questions

Posted by CNKS on April 27, 2006 at 19:48:59 from (204.249.178.138):

In Reply to: Super C head questions posted by BillWV on April 27, 2006 at 18:21:32:

80 ft lbs. As to the tighening I have seen various ways reported as "correct". I run it, then tighten the bolts/nuts when warm. I think the theory behind the loosening first is that it takes a smooth motion to get them tightened properly. It may take more torque to get the nut/bolt to begin to move if it was not loosened first, giving a false reading, leaving it under torqued.

Replies:

• Thanks (nm) BillWV 04:23:00 04/28/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]