Rear engie seal 300U

Posted by Lugnut Ed on May 09, 2006 at 18:17:05 from (24.52.123.192):

I posted topic earlier but I apperantly put it in the wrong place. I've got a real delema, I'm woking on a 300U with a C169 engine.The man at the parts store told me he needed the number off the rear engine seal. When I told him it was a "rope" seal, he said if its not leaking don't touch it. Well it wasn't leaking but the advice was a little late. The gasket on the top half of the retainer is broken in several pieces and has to be replaced. Can I put the retainer back on and seal it with silicone? I cannot drop the oil pan because that is how I'm holding the back half of the engine.Can I get the the bottom half of the retainer off by removing the pan bolts below it? I think I could replace the pan gasket after the tractor is put back together. Any and all help would be greatly appriciated. I feel like a real dummy!!
Thanks Ed

Replies:

• Re: Rear engie seal 300U Rick?oasis Id 06:04:57 05/10/06 (0)
• Re: Rear engie seal 300U Bill46 05:22:07 05/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]