Re: Farmall 300 or 350

Posted by Dave Slater on May 14, 2006 at 07:42:57 from (64.12.116.65):

In Reply to: Farmall 300 or 350 posted by GooseCreek Farms on May 14, 2006 at 03:54:19:

Several ways to tell,but sometimes parts are swaped around through the years. This is not a 100 percent sure way to tell but most times if the housing with serial # is from a 300 and it has a T/A. Look at the lever on T/A clutch shaft left side of tractor that rod from T/A operating handle pins to. There will be a part # if it starts with numbers 360 the housing is most likley out of 300. If number begins with 365 it was used on 350. If your tractor is a original 300 with serial # you posted it should have came with rear cast wheels like a H or SH. Also most if not all castings would probably have a Z code with that serial # if 300.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]