Re: 6V Charging System on 350U

Posted by Formerly PaMike on May 27, 2006 at 14:01:21 from (24.152.213.144):

In Reply to: Re: 6V Charging System on 350U posted by John T on May 27, 2006 at 09:19:57:

I charged the battery fully(6.8 volts). When I jump the field terminal on the gen to ground the amp needle swings to the charging side. However, the voltage at the battery terminals only goes from 6.8volts to 6.85 volts. I cleaned the ground on the vr but the system still doensnt charge unless I ground the field on the gen. I checked the resistance between the field wire at the vr. and the field at the genny and its fine. Since my system is a 4 wire voltage reg the switch doesnt have to be grounded right? I guess I should do your genny motor test next?
Thanks for your help.

Replies:

• Re: 6V Charging System on 350U John T 18:29:36 05/27/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]