Re: farmall m hydraulics

Posted by Old Gomer on May 31, 2006 at 21:43:16 from (205.188.116.133):

In Reply to: farmall m hydraulics posted by ejbj on May 31, 2006 at 21:27:41:

Are you using the belly pump which is controlled by one handle to the right of the light bar? Does the belly pump have hoses attached? Is any equipment connected to the hoses? Let us know a little more to get accurate information.

If the three outlets are capped or plugged, you will have to remove one of them to test the pump. Put oil in the pump, start engine and pull control rod all the way back. Oil will pump out through the open plug. (put a hose on it first)to dump it in a bucket, and not on everyone around you.

Replies:

• Re: farmall m hydraulics ejbj 21:51:42 05/31/06 (4)
  • Re: farmall m hydraulics ejbj 19:39:37 06/01/06 (0)
  • Re: farmall m hydraulics Nat 2 06:03:44 06/01/06 (0)
  • Re: farmall m hydraulics williamf 04:32:25 06/01/06 (1)
    • Re: farmall m hydraulics Wayne Swenson 06:05:14 06/01/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]