Re: M Burning Points - Question from Bob M

Posted by Stan(VA). on June 03, 2006 at 06:38:23 from (4.248.249.175):

In Reply to: Re: M Burning Points - Question from Bob M posted by Bob on June 02, 2006 at 07:11:56:

Bob,
I did see your response to my post a day or so ago before we lost them. I was not aware of the PTC ballasts, so thank you! That makes a lot of sense, sounds like a good idea, but I've been having trouble finding specs for them on-line. I've only found a ref to a Mallory 700 with specs of 0.75 to 1.5 ohms, 200 watts (and that page didn't even list the temperature response).

The numbers listed in this thread (NAPA # ICR-23 or Standard Ignition # RU-11) will be helpfull, but where do you find the specs for these? In my searches they just come up as an ignition ballast and I can't tell the difference. My curiosity is getting the best of me ;) but I'd be really interested in seeing a temperature vs resistance vs time chart in this application.
Thanks,
Stan(VA).

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]