Re: Hydraulics, 300 utility

Posted by mark k on June 04, 2006 at 21:21:10 from (64.19.108.24):

In Reply to: Hydraulics, 300 utility posted by Jimer on June 04, 2006 at 18:38:12:

Hello, I have a 350 U and the psi I think is supposed to be 1200, mine isn't. I have aux. outlets in the back of mine and put a gauge on there and it showed 800 psi so I thought that maybe I was loosing something through the valves I knew the cyl. is ok. I got some fittings togather and connected into the psi line close the the pump where I could temporarily dead head (close off ) the psi side of the pump and look at the gauge. Made no difference I had the same psi. Pump is tired maybe used too much when new.
Have a good one.
Mark

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]