Farmall & IHC Tractors Discussion Board |
Re: The hay was ready
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Ron-MO on June 08, 2006 at 08:59:06 from (67.128.239.42):
In Reply to: The hay was ready posted by Michael Soldan on June 08, 2006 at 05:02:07:
I had the same thing this week. I got in a little hurry thinking it was going to rain, and had one headache after another. I could not make it bale right. Let the next batch dry a little longer and baled without a miss and the bales are easy to handle. I just try to bale a 50 lb bale. Makes life a lot easier. Sure there are a few more of them, but at least I can find a little help and do not tire nearly as easily. On day drying was not nearly enough (using a sicle mower) here in MO with temps in the high 80's. (by the way - I was fortunate enough to survive a stroke in January).
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|