Re: Cleaning up my H's guts

Posted by Janicholson on June 13, 2006 at 18:45:21 from (66.173.50.130):

In Reply to: Cleaning up my H's guts posted by Kevin on June 13, 2006 at 18:37:59:

Squirting from underneath with a oilcan and using a brush would be ok, pouring it in from the top will dilute the oil on the cylinders, and I (personally) would not do it. Use a bottle, or tube brush and ream out passages as needed, but I would not drench it. Oil the cylinder walls before assembly, and when starting it, I would use a pump oilcan and pump the gallery full of new motoroil (many pumps with a rubber tube to the oilcan into the oilpressure sending port on the block.) JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]