Re: farmall 806 hydraulic

Posted by the tractor vet on June 23, 2006 at 08:21:14 from (64.179.117.85):

In Reply to: farmall 806 hydraulic posted by roytex on June 23, 2006 at 07:27:07:

Well it is not that big of a deal if it is the shaft seal . First you will need two long 1/4 inch fine thread bolts . I use a 6 1/2 inch long ones a steering wheel puller a 1/4 fine thread tap and a impack to remove the retaining nut a pair of snap ring pilers and a seal kit that will run ya somewhere around 15 bucks . Remove the steering wheel and remove the snap ring , then replace the steering wheel and give it a quick turn either way and the seal should pop wright out . THen install the new seal and bushing and replace the steering wheel . Now if the outer seal is leaking then get back with me and i'll walk ya thru that one.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]