Re: 1950 M ignition starting problem

Posted by Bob on June 26, 2006 at 09:31:03 from (64.21.249.40):

In Reply to: 1950 M ignition starting problem posted by m.r.vmax on June 26, 2006 at 08:43:14:

Look for a ballast resistor that may have been installed in the primary wiring to the coil by a PO, which is dropping the voltage to your new coil, which needs full voltage for a HOT spark.

Check the voltage at the (+) terminal on the coil.

Replies:

• Re: 1950 M ignition starting problem m.r.vmax 11:12:25 06/26/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]