Re: IH 1466 Hydraulics

Posted by Allan In NE on July 05, 2006 at 03:55:37 from (148.78.243.26):

In Reply to: IH 1466 Hydraulics posted by Brian T from OH on July 04, 2006 at 21:48:11:

Brian,

Just guessin' here, but it sounds to me like you aren't getting the hoses seated properly. Are you pulling the internal slider rearward, inserting the hose and then pushing the whole works forward again before throwing the lock lever?

There is a friction clutch at the bottom of the draft lever. It needs tightening 'bout once a year if used heavily. Takes a 1/2" socket, if I remember right.

Allan

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]