Re: H 2-way hydraulic conversion

Posted by CNKS on July 15, 2006 at 17:17:17 from (204.249.178.138):

In Reply to: H 2-way hydraulic conversion posted by fred kobs on July 15, 2006 at 07:31:42:

If you can find the "Christmas tree" (remote) valve from salvage, that will work, you also need the rod that mounts on the light bar as well as the one you have now. If not you can buy a spool valve and hoses. The setup is: One of the pressure ports to spool valve, spool valve to cylinder inlet, cylinder outlet to spool valve, spool valve to reservoir (return). You can tee into the fill neck for the return, or you can drill and tap a hole into the reservoir (possible contamination -- I would tee into the filler neck. The main control needs to be in the up position for the remote to work.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]