Re: IH 300 pushrod bent HELP

Posted by Hugh MacKay on July 19, 2006 at 02:48:02 from (216.208.58.183):

In Reply to: IH 300 pushrod bent HELP posted by Mark-Ontario on July 18, 2006 at 17:38:47:

Mark: I wouldn't get too hung up on the cause, it happens from time to time and I've had it happen on relatively new tractors. Just straighten or replace and make sure that particular valve and rocker arm are moving freely. It could be a bit of rust, and you may find no visable cause.

In my many year with tractors, I've had about 5 push rods bend, and it wasn't always 50 year old tractors. Had it happen to a 1066 with 20 hours on meter, 656 with roughly 2,000 hours. The others I remember were older.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]