Re: Magneto/tach ???

Posted by ScottyHONeY on July 28, 2006 at 06:51:09 from (69.95.213.88):

In Reply to: Re: Magneto/tach ??? posted by magman on July 28, 2006 at 06:41:34:

Jon, Andy,

Thanks for checking in. All I'm planning on using is the tach on the meter to adjust high and low idles, etc. There's no power at all in the tach. It's just that with the mag I don't think I have my usual low-voltage spot to hook the tach onto. UNLESS its the ground-wire stud. But I'm wondering if the current running through the tach to ground would be enough to ground out the mag, leaving me with RPMs of zero, a state I can detect quite accurately by ear. ;8^)

Setting up and timing the mag and the point gap I'll do by hand.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]