Re: Farmall A want pull load

Posted by Wayne Swenson on August 02, 2006 at 07:56:18 from (71.13.41.123):

In Reply to: Farmall A want pull load posted by Russell S. on August 02, 2006 at 07:33:06:

Check that ignition timing is set at Top Dead Center when rotating the engine by hand. Use a ohmmeter or test light to be certain. The mark is hard to see on the flywheel so locate it and use chalk or white-out to highlight. I believe it is stamped TC 1-4; the mark will line up with the raised mark on the flywheel cover.
Helps to have 2 people on this task.
Other concern is the proper float level; not enough fuel will cause the same symptom as incorrect timing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]