Re: adding an extra reservoir to Lift-All on Farma

Posted by Loren P on August 17, 2006 at 13:16:39 from (64.65.174.118):

In Reply to: Re: adding an extra reservoir to Lift-All on Farma posted by Michael Sheik on August 17, 2006 at 12:47:56:

I suppose that not having oil in the cylinder reservoir would allow the ram to pull out on it's own after the load shifts past the pivot point, assuming the reservoir is the back side of the ram. I've seen this happen with the hoist on our 1 1/2 ton Chev, which uses the cylinder reservoir. When dumping a load of rock, the bed will flip up all the way after enough rock moves to the back. I'll be hauling mostly black dirt for landscaping around the house, so it shouldn't be much of a problem, since the dirt doesn't roll off very fast.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]