Re: M Farmall not getting fire to plugs

Posted by Michael Soldan on August 20, 2006 at 05:27:23 from (24.235.41.226):

In Reply to: M Farmall not getting fire to plugs posted by Bill Zuke on August 19, 2006 at 18:26:40:

Bill, I support what you have been told, don't use a 12 volt battery if the system is 6volt , you can burn up some electrical components that way. If the tractor is a mag ignition, remove the rotor cap and clean the points,fine emery cloth folded in half between the points, rub and rub and rub and when you think it can't possibly need any more rubbing...rub it for another minute. This will usually be the problem on an M with Mag that has sat for a long time. As our other tractor neighbours have said , get a manual and go through step by step to solve. I have an M that sat 10 years and all it took was those points being cleaned up and it started on the second lift of the crank...good luck..Mike in Exeter Ontario

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]