Re: M Farmall not getting fire to plugs

Posted by John T on August 20, 2006 at 06:30:22 from (66.244.90.5):

In Reply to: Re: M Farmall not getting fire to plugs posted by Bill Zuke on August 19, 2006 at 20:52:05:

Now knowing its Magneto Id say first try to non abrasively clean/buff/polish the points and check the gap but if they are badlyyyyyyy burned or pitted or carboned up use a points file to dress smooth n clean them and re gap n give her a try. I dont like to use emery cloth or sandpaper type products on points cuz of the residue it can leave. Also try it with the kill wire removed in case it has a short somewhere but have her jury rigged so you can attach a ground to the kill stud if necessary. If she then sparks but its a faint thin wimpy yellow spark as opposed to a visible blue you may wanna change out the condensor. If its more then that Im out to lunch on IHC mags.

Let us know, best wishes n God Bless

John T

Replies:

• Re: M Farmall not getting fire to plugs Bill Zuke 17:49:39 08/20/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]