Re: 350 U Sputtering under load

Posted by CNKS on August 20, 2006 at 20:06:39 from (204.249.178.138):

In Reply to: 350 U Sputtering under load posted by jaybird2 on August 20, 2006 at 19:46:47:

The high speed screw is a "cut" screw. It doesn't have a "sweet spot." Max power is obtained with 5 turns out, you can turn it in for better economy, but it should not be adjusted like the H carb -- (in until rough, out until smooth). That will cause it to sputter under load. If you have it 4 or so turns out, you have other problems. I doubt if it is fuel flow, except that some inline filters can cause problems. I wouldn't use one unless there is absolutely no other way to keep the fuel clean. Sometimes you have to soak them a long time, be sure you use carb cleaner, not parts cleaner.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]