Farmall & IHC Tractors Discussion Board |
Re: correct tire size
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on August 23, 2006 at 11:50:43 from (75.24.29.127):
In Reply to: correct tire size posted by mta man on August 23, 2006 at 11:27:19:
Back when New it was a 12x38 and that was replaced with the 13.6x38 , now the 15.5 is the same hight as the 13.6 but the 15.5 should be on 14 inch wide rims to keep it layen flat . what looks real nice on a S/MTA is the 14.9 x38 but here again it takes a 14 inch rim . You can split and weld in a band to widen your rims out if it has the 12 inch rim on it now and if done wright you can not realy tell . I widend the rims on mine and made mine 15 1/2 inchs wide and like a dumb Arrs i put 16.9x38 on it just so i could go play tractor pullen , should have listened to my inner self and went with the 14.9's as they are a bit taller then the 15.5 and darn near as wide as the 15.5 and they do look good on a MTA . THe only nice thing about the 16.9's is THE ROAD SPEED With the govener set at 2100 she will get down the road.
Replies:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|