Re: Need picture!!

Posted by Dr.EVIL on August 24, 2006 at 14:45:25 from (216.136.115.250):

In Reply to: Need picture!! posted by Granger on August 24, 2006 at 10:09:23:

I thought We explained it two days ago...I think You will have to pull the cast iron wheel center by taking the three 1/4" capscrews out of the center hubcap and remove the cotterkey & the wheelbearing adjusting nut & washer and take the whole wheel off. If You don't have room enough to get the three mounting lugs over & around the cast center You have to pull the wheel. If You have the tractor front axle jacked up it's a two minute job with handtools.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]