Re: 1086 MFWD

Posted by JakeF on August 25, 2006 at 10:47:17 from (64.146.188.222):

In Reply to: Re: 1086 MFWD posted by P Backus on August 24, 2006 at 23:48:09:

Yes, by the engine oil pan. The 88's are basically the same as your magnum from the bellhousing back. The first 13,000 magnums are just a full powershift 88. They were leftover IH made castings that hadt the torque tube draft hole plugged and electronic added. The more severe clunk you get from 6-7 and 12-13 in the magnum is where you shift ranges on an 88. The biggest problem with the 88's is the electronic transmission controls, and burning out one of the clutchpacs. I don't know if you could get an anolog guage set in the 88's or not. Jake

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]