Re: M Farmall Brakes

Posted by Randy S.E.-MN on August 30, 2006 at 11:43:15 from (206.9.216.41):

In Reply to: M Farmall Brakes posted by Jeff Allen on August 29, 2006 at 18:05:59:

If you only put one seal in per side, I think you"ll be sorry...it will probably leak. The originals had to be that wide for a reason. I thought I could get away with one seal being mr. macho mechanic (30 yr.) but I shot myself in the foot as the saying goes. The new seals are narrow enough to pop in two. Install with both seal lips inward and pack the gap between them with a good grease 360 degrees around, grease the seal surface of the drum and reassemble. You won"t have that problem for a long time. (provided the bearings aren"t sloppy)...Randy

Replies:

• Re: M Farmall Brakes Chris B. 23:01:42 08/30/06 (1)
  • Re: M Farmall Brakes Randy S.E.-MN 05:52:25 08/31/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]