Re: A cracked block?

Posted by Tom Windsor on August 31, 2006 at 16:46:49 from (152.163.100.65):

In Reply to: A cracked block? posted by Andy2006 on August 31, 2006 at 16:37:50:

Not every crack in a block means junk it. In the past two years, I have welded cracks in 3 different blocks and they are still satisfactory. The last one was in the water jacket of a G Allis Chalmers. I generally do the welding, then grind it smooth and then go over it with JB weld, then grind it smooth again. I use the JB weld just to fill any pin holes that might have been left over from the welding. You must be careful with the welding, use the proper equipment and know what you are doing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]