Re: international 350 backhoe

Posted by Janicholson on September 16, 2006 at 09:25:37 from (66.173.50.110):

In Reply to: international 350 backhoe posted by Blackbed on September 15, 2006 at 16:54:14:

If the coupling is misaligned the bolts will be under far more than normal stress. Loosen the pump from the mounts, then put the coupling together. and move the pump untill it seems centered (concentric) with the shaft. If it needs shims. or is pulled crooked by the mount holes, repair the mount, or use shims to get things aligned. Then try it. If the engine is severely loaded by the pump when operating, it is possible that the valving is wrong, or mis adjusted causing it to be closed centered when it is not designed to be, nor intended. JimN

Replies:

• Re: international 350 backhoe blackbed 12:29:25 09/16/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]