Re: 826 Front End/Steering

Posted by Andy Martin on September 19, 2006 at 10:35:54 from (63.123.95.201):

In Reply to: Re: 826 Front End/Steering posted by the tractor vet on September 19, 2006 at 08:14:45:

I agree completely. Most of the steering arm weld jobs are poorly done and crack out anyway.

That is why I was careful to say ONLY after you decide you need new spindles and arms should you weld on them. I should have added if you don't have the money for new parts.

Stainless like 309 is really good for welders who are not so good and will join most alloys which are weldable, including high strength and high alloy. And it works well with cracker box welders. When I don't know the metallurgy I grab the 309.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]