Re: HELP m not starting

Posted by wdrew24 on October 17, 2006 at 19:39:50 from (24.74.43.5):

In Reply to: Re: HELP m not starting posted by M clunker on October 17, 2006 at 19:12:34:

Ok then, I think I might have it...The new starter is TOO tight in the ring gear. It's either that or the ground ain't no good, or the other cable ain't no good, or the cranking amps in the new 12 volt ain't high enough...cause your pickup truck battery isn't high enough in the CCA department. Does the starter crank wildly when you have it pulled out of the tractor but still hooked up to your wires?? It should have some awesome speed and torque...If not, back to cables and or not high enough Cold Cranking Amps. If it does spin wildly with plenty of torque, then the problem is the starter is too tight in the ring gear. The only way that could happen is the wrong starter. Drew

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]