Re: Glow Plug Problem 1979 IH 384 / DB154 Diesel

Posted by tasbrus on October 19, 2006 at 16:23:06 from (24.59.31.200):

In Reply to: Re: Glow Plug Problem 1979 IH 384 / DB154 Diesel posted by Ted Van Ryn on October 19, 2006 at 12:37:40:

Ted, check the voltage between ground and each glow plug end. Each one should be a little less then the one in series before it. If you get a big drop in voltage (almost no voltage) then that glow plug or the one before it is grounded.When I pulled my glow plugs I could see scrapes on them from hitting the pre cups. Look in the plug hole and see if you can see or feel any of the pre cup. I had to pull my injectors and pre cups so I could hog out the holes in the pre cups to clear the plugs. They are very hard and I used a dremal tool. It took a while but I got them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]