Re: No spark

Posted by merv on October 28, 2006 at 12:00:34 from (75.6.175.2):

In Reply to: Re: No spark posted by F-Dean on October 28, 2006 at 07:43:16:

I tested the cap, with a continuity tester.
The number three Tower has no continuity. I am thinking about taking a small drill bit, drilling a hole through the tower. So I can run some copper through it to see if that makes contact.
I have new points and condenser in the mag. I do have on the other three towers. But the spark is not a strong blue Spark.
I'm not very familiar with the magneto and gas engines. Most of my experience is on the big caterpillars. D-9 D10, and the likes. You don't need Spark on them. Just fuel air and compression.
Thanks for the information, I will let you know what happens. Any further information is greatly appreciated.

Replies:

• Re: No spark dan hill 04:05:32 10/30/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]