Update on Burnt Valve

Posted by Steve200460 on October 30, 2006 at 15:33:12 from (64.26.110.9):

Thanks to all. It turned out to be at least 3 things. Points needed set. Ignition switch finally quit, so probably was weak beforeit quit. Both the wire from the ignition switch and the one coming from the starter solenoid were connected to the ballast resisitor. Once all were fixed, it started fine. I checked the valve lash and it is okay but no increase in compression. Now I get to decide if I want to ignore the lower compression on the one cylinder or pull the head and do a valve job. Any opinions?

Replies:

• Re: Update on Burnt Valve FarmallBob 17:40:54 10/30/06 (0)
• Re: Update on Burnt Valve Janicholson 17:08:21 10/30/06 (0)
• Re: Update on Burnt Valve old 15:56:36 10/30/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]