Re: f-20 fan pulley and a couple of ?

Posted by Farmallgray on November 03, 2006 at 13:19:28 from (152.163.100.65):

In Reply to: f-20 fan pulley and a couple of ? posted by whiskey river on November 02, 2006 at 18:13:27:

For the carb fitting, just unsolder it from the old line and solder to a new one. Get a good rolling cam tubing bender. Snap-on sells a nice one under their bluepoint brand for about $25. I have had one for about 15yrs and love it. Get plenty of extra line because it will probably take a couple tries before you get it bent perfect. If your tractor is a late one it should have the fittings with breakaway ferrules. These are still availble from CaseIH (same ones used on the letter series).

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]