Re: Tractor stands?

Posted by banjo on November 05, 2006 at 00:50:09 from (65.67.203.98):

In Reply to: Tractor stands? posted by Mike CA on November 05, 2006 at 00:00:47:

Hey Mike, sorry but i don't have any pics but i made an A-frame to hold one half of it. And built some stands to bolt to the other half. used a 2 1/2 ton floor jack underneath to roll apart and the stands/legs bolted to the sides of the tractor would keep it from falling if it slipped.

Some folks have wheels on the A frame to roll it but mine was stactionary. I used a chain hoist to hold it and blocks underneath made from railroad ties. Just used what i had around the place.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]