Re: Exhaust pipe and muffler replacement

Posted by Larry Martin on November 15, 2006 at 15:41:05 from (205.188.116.133):

In Reply to: Exhaust pipe and muffler replacement posted by Mike CA on November 15, 2006 at 14:44:52:

As an old retired pipefitter I have done this a number of times. Place a rag in the pipe below the top of the manifold and cut the pipe off flush with the manifold with a sawzall. Take the sawzall and cut two verticle slots in the remaining pipe in the manifold being carefull to not cut too deep. Then take a small chisel and coulapse the pipe and remove. Take a 2" pipe tap and c;ean up the manifold. Take a shop vac anf clean out the manifold. remove the rag and install a new piece of 2" black pipe.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]