Re: super a engine sleeves

Posted by Stan(VA). on November 18, 2006 at 15:16:45 from (4.249.192.10):

In Reply to: Re: super a engine sleeves posted by werowance on November 18, 2006 at 14:13:35:

In a nutshell you need the kit for the late Super A. You can find this in the archives several times, but your old sleeves probably have the 3-7/16" OD at the Oring seal, and the new ones you got will have the 3-5/16" OD of the earlier motors. If you look just behind the oil filter on the block you should see a 354898R casting number. If you don't put a water pump on it make sure you still get the early head gasket with the larger water jacket openings.
Stan(VA).

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]