Re: Swapping parts between a 560D and a MD

Posted by Wardner on November 21, 2006 at 16:57:35 from (206.148.20.14):

In Reply to: Swapping parts between a 560D and a MD posted by Brad in WI on November 21, 2006 at 12:02:25:

A fast hitch could be put on your pickup or, God forbid, a John Deere. It's a matter of how well you work with metal and your imagination. I probably own the only 650 with a fast hitch. It is extra rugged with side plates carved from 1" plates. It has two IH 3.5" cylinders. It can be quickly converted to 3pth. It is cobbled together with parts from a 560, 706, and misc junk from my pile. I don't think these pictures will help you much, but follow D Slater's advice and look at the bolts that hold on your axle housings. Attach your fabricated side plates there. The pivot for the wishbone will attach to the M swinging draw bar mounting holes. Good luck.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]