Re: H, axle bolts are STUCK! air impact?

Posted by Glenn F. on November 25, 2006 at 16:10:03 from (4.254.76.15):

In Reply to: H, axle bolts are STUCK! air impact? posted by arod on November 25, 2006 at 11:09:02:

Short of heat, soak 'em down good with pbBlaster, etc., then a few days later, slowly work 'em back and forth(tighten/loosen), back and forth, back and forth. Sometimes they will SLOWLY begin to turn. Even if/when they begin to turn, continue with the back and forth till they really start to come. I've gotten some axle clamp bolts loose on my SC and DC CASES that really surprised me. Another trick is to hit the nut a SHARP blow with a big hammer. This can break them loose.

Good luck. Glenn F.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]