Re: Ways to pull sleeves without taking the crank

Posted by Erik in WI on December 11, 2006 at 09:01:29 from (65.162.45.62):

In Reply to: Ways to pull sleeves without taking the crank out? posted by Jonfarmer on December 11, 2006 at 08:52:08:

If you have a welder, weld beads on the sleaves.
Start with 4 beads, top to bottom, front, back, left and right. As the beads cool, they shrink, causing the sleave to shrink. Sometimes you can pull them out by hand, sometimes they need a little tap with a 5lb hammer and a oak 2x4.

Cover the crank with a wet towel, so the splatter doesn't hurt the crank journals.

Good luck
Erik in WI

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]