Re: Pictures of Winch mount

Posted by Keith-OR on December 24, 2006 at 09:33:33 from (207.200.116.5):

In Reply to: Re: Pictures of Winch mount posted by leon on December 24, 2006 at 04:27:58:

Leon, the one place I messed up, I should have used a piece of heavy wall pipe for my T, instead of the 2x2 square tubing. This would let my winch pivot right or left, depending on where I was attached to unit I was pulling on trailer.

You could weld a piece of channel iron across inside you trailer tongue,then weld your 2 1/4 reciever tubing to that(instead of on the front of trailer frame) about where my front angle iron bracket is. This is how I am going to move my winch forward.

The angle iron frame is for my utility box. Which I keep chainsaw,bar oil,gas and tool box for all tools needed just for saw.

Keith & Shawn

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]