Re: Super A final drive seal

Posted by Chad504 on December 30, 2006 at 11:33:39 from (68.73.157.122):

In Reply to: Super A final drive seal posted by Jerry vanderheite on December 30, 2006 at 07:39:48:

I just did mine, if it"s the seal on the final drive side, here is what I did. I used a puller to remove the brake drum, then removed the coverplate, on the opposite side of the final drive. This will allow you to pull out the top gear and shaft out, as an assembly. Then, from the outside you can tap the old seal out, and replace it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]