Re: FELPRO head gasket on Super C?

Posted by MN Scott on December 30, 2006 at 21:00:30 from (206.9.216.62):

In Reply to: Re: FELPRO head gasket on Super C? posted by CLIFF S on December 30, 2006 at 20:17:54:

My 706 did this after I replaced sleeves last year. I torqued to specs, everything was clean and the head was resurfaced but it bubbled in several places. I didn't have the time to pull the head again so I just ran it. In about 10 hours of feeding hay it sealed itself up. Now with 150 hours on it no leaks at all. Maybe the gasket just had to conform itself to the head? I'd say as long as there is no water in the oil just run it and put it through several heat cool cycles and see what happens.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]