Re: 806 HP w/ Turbo

Posted by the tractor vet on January 05, 2007 at 17:11:46 from (75.19.122.223):

In Reply to: 806 HP w/ Turbo posted by Murph75 on January 05, 2007 at 15:30:56:

Well like said down below they did not come from the factory with a hairdrier on them but when one was installed they were set between 112 -120 and when ya start going over that you are realy putting a strain on the pistons unless it was one of the later blocks then they had the nozzels sprayen the bottom of the pistons. It is like this if ya need more pony power then get a bigger horse.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]