Re: 1940 H need the nitty-gritty

Posted by D Slater on January 09, 2007 at 19:45:51 from (205.188.116.133):

In Reply to: 1940 H need the nitty-gritty posted by SKK - Big Red Fan on January 09, 2007 at 17:29:12:

Don't think you will ever know for sure, but look at cylinder head and see if date code matches tractor. If so look at # on head, if its 8043 D it may have come gas. If it has 8186 D or 8776 D it came with a starting tank unless head was changed. Early heads used 3/8 inch studs for manifold instead of 7/16 size on later heads. Tractors before serial # 20891 did not use a suffix code. Not positive about this but think only one size grey iron piston was used for all early tractors.Not sure if casting # on block would be 6937 D, DA or DB. If I remember correct they were up to DC sometime in 1941.

Replies:

• Re: 1940 H need the nitty-gritty SKK - Big Red Fan 19:59:46 01/09/07 (0)
• Re: 1940 H need the nitty-gritty D Slater 19:58:53 01/09/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]