Re: 2404 Loader advice needed

Posted by JayWalt on January 11, 2007 at 23:30:59 from (24.223.138.48):

In Reply to: 2404 Loader advice needed posted by j schlosser on January 11, 2007 at 19:26:30:

A crunching noise isnt good. I would drain a little hydraulic fluid and look for any metal pieces. If the oil looks good, then most likely the pump is still good, but not necessarily. I myself would crack open the output hose of the pump and see if any oil coms out while the pump is running, Might also, try loading it up by trying to raise the lift. If the oil increases in leakage through the cracked hose, the pump would seem to be good and the problem is in a control part of the system. For troubleshooting that, well I dunno what I'd do then, try dif vavles. I dont know the particulars of you system, and am far from an expert, so I'm not of much help

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]