Re: seat;---3 way grind? and other questions

Posted by RustyFarmall on January 23, 2007 at 06:56:11 from (199.120.81.233):

In Reply to: seat;---3 way grind? and other questions posted by shoo_giesty on January 23, 2007 at 05:36:39:

Milling the head will result in more compression, which in turn will make more power, but I am a firm believer in never removing any more than is necessary to give a good flat and true surface. Remember, any material that is milled off can never be put back on, and if too much is removed, the head becomes nothing more than a paper weight, and those heads are not being made anymore.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]